-
Category: IP Dome, Network Camera- 4-MP 1/1.8" CMOS image sensor, low luminance, and high definition image.
- Outputs max. 4 MP (2688 × 1520) @20 fps, and supports 2560×1440 (2560 × 1440) @25/30 fps.
- H.265 codec, high compression rate, ultra-low bit rate.
- Built-in warm light, and the max. illumination distance is 30 m.
- ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments.
- Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes.
- Intelligent monitoring: Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human)
- Abnormality detection: Motion detection, video tampering, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict,illegal access, and voltage detection.
- Supports max. 256 G Micro SD card; built in Mic.
- 12 VDC/PoE power supply, easy for installation.
- IP67 protection.
- SMD Plus
-
Category: Junction Box- Material: aluminum
- Water-proof junction box
- Aesthetic design
- Safety rope hook attached, secure and reliable
-
Category: Uncategorized> Dahua High Speed Dome > Dahua Standalone DVR > Network Video Server > RS485, RS422 (reserved), USB, RS232 & Network > Three Dimensional Joystick Control of PTZ Functions > Preset Position, Auto Scan, Auto Pan, Auto Tour & Pattern Auxiliary Functions > On-Screen Menu & User Operation Procedure Tips > Connect to SmartPSS or DSS platform via USB -
Category: HDCVI 4MP Dome Camera, HDCVI Camera* The parameters and datasheets below can only be applied to 1400-S3 series
> Max 30fps@4MP
> HD and SD output switchable
> 2.7-12mm motorized lens
> Max. IR length 30m, Smart IR
> IP67, IK10, DC12V
-
Category: Connectors & Tape- This 2.1 x 5.5mm Power Plug features one power connector end DC plug male to another end terminal.
-
Category: HDCVI Camera, HDVCI 5MP Bullet Camera- Max 25 fps at 5 MP (16:9 video output).
- Smart Dual Light
- 20 m illumination distance.
- Super Adapt.
- Built-in MIC.
- 3.6 mm fixed lens (2.8 mm optional).
- CVI/CVBS/AHD/TVI switchable.
- IP67, 12 VDC.
-
Category: Video Balun- 4K/8MP Passive Video Balun Push-type
- Support 8MP Camera CVI/TVI/AHD and CVBS
- 75 ohm BNC Male Connector, Gold plated
- 2 Pin Spring Terminal Blocks
- 100mm Cable, ABS Shell Black
- Multiple can be used in Combination
- Built-in TVS component, three-level surge protection
- 720P/960P/1080P≤400M
- 3MP/4MP/5MP/8MP≤200M
-
Category: Junction Box- Material: weatherability and nondiscolouring PP
- Structural water-proof design
- Hidden line design, can place video balun with HDCVI/AHD/TVI/CVBS cameras
- Aesthetic design
-
Category: HDCVI Camera, HDVCI 4MP Bullet Camera4MP HDCVI IR Bullet Camera
* The parameters and datasheets below can only be applied to 1400-S3 series.
> Max 30fps@4MP
> HD and SD output switchable
> 2.7-12mm motorized lens
> Built-in mic(-A)
> Max. IR length 60m, Smart IR
> IP67, DC12V
-
Category: Extended Video Recorder (XVR), XVR 5MP Series-
H.265+/H.265 dual-stream video compression.
-
Supports 32-channel AI-Coding.
-
Supports HDCVI/AHD/TVI/CVBS/IP video inputs.
-
Max 32 channels IP camera inputs, each channel up to 8MP; Max 128 Mbps incoming bandwidth.
-
Up to 12 channels video stream (analog channel) perimeter protection.
-
Up to 32 channels video stream (analog channel) SMD plus.
-
Up to 6 channels video stream (analog channel) human face recognition.
-
IoT & POS functionalities.
-
-
Category: Wireless Camera4MP HD Video 2.4/5GHz 802.11a/b/g/n/ac/ax 4mm Fixed Lens，Support Night Vision Support Two-Way Video Call，2.8 inch Screen Support H.265/H.264 Support Human/Motion/Sound Detection -
Category: Tools, Accessories- Zero flex frame prevents torque loss during the crimping cycle.
- Tool steel die head assembly provides 360 degree of connector support during crimp.
- Clean, ultra flush trim on the EZ-RJ45® extended conductors.
- Expanded surface area on contact drivers delivers full, uniform crimp force.
- Built-in cutter and stripper for flat and round cable.
- Full surface to surface contact delivers uniform crimp force.
- Laser marked with wiring guide for proper wire sequence.
