Product

  • Lan Tester & Meter

     1,200 + VAT
    Category: ,
    • Measure network cable length to an end or broken point.
    • Check wiring error in STP UTP 5E, 6E, coaxial cable, such as open circuit,short circuit, jumper wire, reverse connection.
    • Display by big LCD, with clear wiremap.
    • Automatically time-delay shut off.
    • Length Calibration: User can set self-calibration factor by a given length cable (The length of calibrating cable needs to be more than 5M )
    • Self-checking and automatically compensate any change in battery capacity or ambient temperature.
  • Category:
    •  Light and cost-effective plastic housing

    • 178°H/178°V extra-wide viewing angle for overall viewing performance

    • High fidelity digital processing for a brilliant and vivid video

    • 8ms fast response time with no image blurring or ghosting

    • Support multiple signal inputs such as HDMI, VGA and USB

    • Built-in speakers

    • Physical button and infrared remote dual control mode

  • · 2-MP 1/2.8" CMOS image sensor, low luminance, and high definition image.

    · Outputs max. 2 MP (1920× 1080)@25/30 fps.

    · H.265 codec, high compression rate, ultra-low bit rate.

    · Built-in IR LED and warm light, the max. IR illumination distance is 30 m and warm light distance is 30 m.

    · Rotation mode, DWDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes.

    · ROI, SMART H.264 +/H.265+, flexible coding, applicable to various bandwidth and storage environments.

    · Abnormality detection: Motion detection, video tampering, audio detection, network disconnection, IP conflict and illegal access.

    · Built in Mic.

    · 12 VDC/PoE power supply,

    · IP67 protection.

    · Supports human detection

    •  4-MP 1/2.9" CMOS image sensor, low luminance, and high definition image.

    • Outputs max. 4 MP (2688 × 1520)@20 fps and supports 2560 × 1440 (2560 × 1440)@25/30 fps.

    • H.265 codec, high compression rate, ultra-low bit rate.

    • Built-in IR LED, and the max. illumination distance is 80 m.

    • ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments.

    • Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes.

    • Intelligent monitoring: Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human).

    • Abnormality detection: Motion detection, video tampering, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection.

    • Alarm: 1 in, 1 out ; audio: 1 in, 1 out ; supports max. 256 G Micro SD card; built in MIC.

    • 12 VDC/PoE power supply, easy for installation.

    • IP67 , IK10 (optional) protection.

    • SMD Plus.

  • Category:
    4 Channel Kit 2 MP / WizSense/ 4 Cameras B1A21 / 4 Channels XVR  
  • Category:
    ◎ 20KM LC Connector Port Gigabit SFP Module ◎ Encapsulated Type: SFP ◎ Transmission Distance: 20KM ◎ Connector: LC connector Port ◎ Transmission Rate: 1.25Gbps ◎ Product Wavelength: TX1310nm/RX1550nm TX1550nm/RX1310nm ◎ Digital Diagnosis: DDM ◎ Working Voltage: 3.3V ◎ Working Temperature: -20°~70°
  • Category:
    • 4K Ultra-HD resolution

    • Suitable for continuous 24/7 operation

    • 9.5ms response time for no motion blur, judder or ghosting

    • 1.07B colors, for a realistic and immersive visual experience

    • High fidelity digital processing for a brilliant and vivid video

    • 178°/178° extra-wide viewing angle for overall viewing performance

    • Professional thermal design to extend equipment lifespan

    • Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format.

    • Access, storage or forwarding at 256 Mbps (180 Mbps when AI function enabled).

    • Max. decoding capability: 16 × 1080p@30 fps. Supports adaptive decoding.

    • AI by NVR: 1-channel face detection and recognition; 2-channel perimeter protection; up to 10 face databases and 20,000 face images; 4-channel SMD Plus.

    • AI by Camera: Face detection and recognition, perimeter protection; SMD Plus; people counting; stereo analysis; heat map.

    • Connected to the third-party network cameras.

    • Security baseline 2.3.

    • 5-MP 1/2.7" CMOS image sensor, low luminance, and high definition image.

    • Outputs max. 5 MP (2960 × 1668) @20 fps, and supports 2688 ×1520 (2688 × 1520) @25/30 fps.

    • H.265 codec, high compression rate, ultra-low bit rate.

    • Built-in IR LED, and the max. illumination distance is 30 m.

    • ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments.

    • Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes.

    • Intelligent monitoring: Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human).

    • Abnormality detection: Motion detection, video tampering, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection.

    • Supports max. 256 G Micro SD card; built in MIC.

    • 12 VDC/PoE power supply.

    • IP67 protection.

    • SMD Plus.

    • 64GB USB flash drive
    • USB 3.2 Gen1
    • Read Speed30–110MB/s
    • Write Speed 8–45MB/s.
    • Gray metal case
    • This 2.1 x 5.5mm Power Plug features one power connector end DC plug male to another end terminal.
    • Vanadium oxide uncooled focal plane detector.

    •  4Megapixel progressive scan CMOS.

    • AI functions: heat detection, tripwire, human/vehicle classification, smoking detection, and call detection.

    • Temperature measurement range of –20 °C to +550 °C.

    • Flexible rules and alarms.

    • Remote auxiliary management.

    • Dual image fusion (visible and thermal channels).

    • Wide input voltage 12 VDC ± 20%, and PoE.

    • IP67 rated.

Go to Top