-
Category: IP Bullet, Network Camera- 4-MP 1/2.9" CMOS image sensor, low luminance, and high definition image.
- Outputs max. 4 MP (2688 × 1520)@20 fps, and supports 2560 × 1440 (2560 × 1440)@25/30 fps.
- H.265 codec, high compression rate, ultra-low bit rate.
- Built-in IR LED, and the max. illumination distance is 60 m.
- ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments.
- Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes.
- Intelligent monitoring: Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human).
- Abnormality detection: Motion detection, video tampering, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection.
- Alarm: 1 in, 1 out (Only - ZAS supports); audio: 1 in, 1 out (Only - ZAS supports); supports max. 256 G Micro SD card; built in MIC.
- 12 VDC/PoE power supply, easy for installation.
- IP67, IK10 (optional) protection.
- SMD Plus.
-
Category: Wireless Camera- 1/2.8" 5Megapixel STARVIS™ CMOS.
- Max. 20 fps@5MP.
- Human detection.
- Tripwire, intrusion.
- H.265 encoding.
- Wi-Fi.
- Two-way audio.
- Sound and light alarm.
- IR and white light, three night view modes.
- IP66.
-
Category: Optical Module-
Single mode single fiber
-
LC port
-
1310 nm sending, and 1550 nm receiving
-
Transmission distance up to 20 km
-
-
Category: PoE Switch, Network Switch- 8*10/100/1000M POE+ 2*1000MRJ45 +1*1000M SFP Port PoE Switch,1-8 ports support IEEE802.3af/at
- Comply with IEEE 802.3, IEEE 802.3u , IEEE 802.3ab standards
- PoE port support AF/AT intelligent recognition. Standard power is 15.4W/port, Maximum power: 30W/port
- Support AI Watchdog, Port self-healing, VLAN, extend 300meter distance, Auto Speed Change, Priority port & reduce the after-resale
- Supports POE devices such as wireless access points (APs) and network surveillance cameras through Category 5/6 Ethernet cables
- The power supply total is 120W
-
Category: Network Camera, IP PTZ- 1/2.8" 4Megapixel CMOS.
- Powerful 25× optical zoom.
- Starlight Technology.
- Max. 25/30fps@4MP.
- IR distance up to 150 m.
- Deep-learning-based perimeter protection.
- Auto-tracking 3.0 and IVS.
- PoE+.
- > IP67, IK10.
- > SMD 4.0
-
Category: Camera Kit8 Channel Kit 2 MP / WizSense / 8 Cameras B1A21 / 8 Channels XVR -
Category: Wireless Camera4MP HD Video 2.4/5GHz 802.11a/b/g/n/ac/ax 4mm Fixed Lens，Support Night Vision Support Two-Way Video Call，2.8 inch Screen Support H.265/H.264 Support Human/Motion/Sound Detection -
Category: Connectors & Tape- 1*100Mbps PoE output with 802.3 af/at 30W
- 1*100Mbps Ethernet output port
- DC Output 12V 2A Max
- Wroking temparature:-10°C~55°C
- Plug and play, no configuration
-
Category: Wireless Alarm- IP65 rated.
- Outdoor product (–25 °C to +60 °C).
- 12 VDC and battery power supply.
- Multiple alarm sounds: Fire, medical, intrusion, panic, and more.
- Sound pressure level: 110 dB.
- Temperature monitoring.
- Frequency hopping and two-way communication.
- Cloud update and automatic recovery from update failure.
-
Category: PoE Switch, Network Switch· Layer two Hardened PoE switch · Supports PoE power management · MAC auto learning and aging, MAC address capacity is 8K · Conforms to IEEE802.3af and IEEE802.3at power supply standard. Port 1-2 supports Hi-PoE 60W power supply · Supports IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards · Wide working temperature design: -30°C~ 65°C · Supports dual power backup -
Category: Tools, Accessories- Current and voltage meter for CCTV Cameras
- Current range: DC 0A – 3A
- Voltage range: 3.6V – 15V
- Voltage error – 3% in the temperature range of -10°C until 35°C
- Current error – 5% in the temperature range of 35°C until 50°C
- Connector: DC 5.5*2.1mm Male, DC 5.5*2.1mm Female
- Material of the housing: ABS Plastic
