Product

  • Category:
    • 4K/8MP Passive Video Balun Push-type
    • Support 8MP Camera CVI/TVI/AHD and CVBS
    • 75 ohm BNC Male Connector, Gold plated
    • 2 Pin Spring Terminal Blocks
    • 100mm Cable, ABS Shell Black
    • Multiple can be used in Combination
    • Built-in TVS component, three-level surge protection
    • 720P/960P/1080P≤400M
    • 3MP/4MP/5MP/8MP≤200M
  • Category: ,
    • Continuity testing
    • Wiring configuration identification
    • Wiring fault detection
    • Signal attenuation measurement
    • Cable length measurement
  • > 4MP, 1/3” CMOS image sensor, low illuminance, high image definition

    > Outputs 4MP (2560 × 1440)@25/30 fps, Max. supports 4MP (2688 × 1520) @ 20 fps

    > H.265 coding, high compression ration, low bit rate

    > Built-in IR LED, max IR distance: 30 m

    > ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments

    > Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes

    > Intelligent detection: Intrusion, tripwire

    > Abnormality detection: Motion detection, video tampering,no SD card, SD card full, SD card error, network disconnected, IP conflict, illegal access, voltage detection

    > Max. 256 GB SD card and built-in Mic

    > 12V DC/POE power supply

    > IP67 protection

    • 16GE+2GE+2GF Full Gigabit 802.3af/at PoE Switch with 16 Port PoE
    • Support IEEE802.3 af/at PoE protocol, An PoE RJ45 port can supply maximum power output of 25.4W;
    • Support 10/100/1000Mbps auto-negotiate;
    • Support Half/Full duplex adaptive, and auto MDI/MDI-X function;
    • All port support wire-speed forwarding;
    • Support desktop and wall-mounted, and rack-mount installation;
    • Plug and Play, no configuration requirements;
    • Metal case, internal power supply, and have excellent heat dissipation performance can let the
    • product running stable for a long time
  • Category:
    • IP65 rated.
    • Outdoor product (–25 °C to +60 °C).
    • 12 VDC and battery power supply.
    • Multiple alarm sounds: Fire, medical, intrusion, panic, and more.
    • Sound pressure level: 110 dB.
    • Temperature monitoring.
    • Frequency hopping and two-way communication.
    • Cloud update and automatic recovery from update failure.
    • 16SFP+8GE Gigabit rack-mountable Fiber Ethernet Switch
    • 24 Auto-Negotiation, Auto-MDI/MDIX Ethernet ports provide smart switching
    • Standard 19-inch rack-mountable steel case
    • Plug and Play design simplifies installation
    • Plans different power output for different cable lengths
    • Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3x standards
  • Category: ,
    ●  Auto range ●  MAX/MIN/REL mode ●  Auto power off (UT61A/B/C/D) ●  LCD backlight (UT61A/B/C/D) ●  RS-232 and USB interface (UT61B/C/D/E) ●  Analog bar graph ●  NCV (UT61A) ●  Low battery indication
    ●  True RMS (UT61D/E) ●  EF (Electric Field) detection (UT61A) ●  Transistor measurement (UT61A) ●  Peak value/hold (UT61E) ●  K-type temperature probe (UT61B/C) ●  Diode/continuity buzzer ●  Data hold ●  Input protection
    • Adopts high-quality wafer level chip

    • Supports SATA III protocol with transmission speed up to 550 MB/s

    • View information through S.M.A.R.T

    • Provides better read and write performance with TRIM and NCQ

    • Low power consumption management

    • Large TBW

  • 10 Ports outdoor PoE Switch with 8-Port PoE ports(6FE+2GE) and 2GE uplink ports IP67 weatherproof enclosure, -40-70℃ working temperature DC 5V output port power up internal 10/100/1000Mbps fiber transceiver All-in-one for easy installation Supports PoE IEEE 802.3af/at 30W for compliant PDs 6KV PoE surge protection 10KV AC surge protection
  • > 2-channel QuickPick 2.0 for analog channels which improves the efficiency of target retrieval.

    > 1-channel Privacy Protection for analog channels which supports masking and restoring human faces that are detected in real time.

    > 8-channel SMD Plus for analog channels or 16-channel SMD by camera which allows the device to trigger accurate alarms for humans and vehicles.

    > 8-channel perimeter protection for analog channels which supports tripwire and intrusion detection powered by AI.

    > 2-channel face recognition for analog channels which supports face comparison.

    > 8-channel AI Coding saves on storage and bandwidth while maintaining the details of targets in videos.

    > Supports HDCVI, AHD, TVI, CVBS and IP video input.

    > Supports up to 16-channel IP camera input and each channel can be up to 8 MP. The incoming bandwidth reaches 128 Mbps.

    > Smart H.265+ and H.265 dual-stream video compression.

    • 5-MP 1/2.7" CMOS image sensor, low luminance, and high definition image.

    • Outputs max. 5MP (2592 × 1944)@20 fps , and supports 4MP (2688 × 1520)@25/30 fps.

    • Built-in IR LED, and the max. illumination distance is 60 m.

    • ROI, SVC, SMART H.264+/H.265+, AI H.264/H.265, encoding after filter, flexible coding, applicable to various bandwidth and storage environments.

    • Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes.

    • Three switchable intelligent resources: IVS, face detection, and people counting.

    • Alarm: 2 in, 1 out; audio: 1 in, 1 out; supports max. 256 G Micro SD card.

    • 12 VDC/PoE power supply, easy for installation.

    • IP67 and IK10 protection; ePoE.

    • SMD 3.0.

    • Max Cable Outer Diameter: 0.275” (6.98mm)
    • Max Insulation Diameter (Conductors): 0.040” (1.016mm)
    • Meets ANSI/EIA/TIA/TAA specifications
    • UL Listed E188111, UL94 V-0 and RoHS3/FCC compliant
    • Solid or Stranded, 24 – 23 AWG
    • 50 micron gold plated contacts
    • Color: Clear/Transparent
Go to Top